DC MOTOR PUMP GROUP one
Standard Description
Consisting of the hefty duty DC motor and also the CB1S gear pump, this pump motor group is an great hydraulic electrical power unit for mobile hydraulic equipments, this kind of as automobile carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and test valve.
DC MOTOR PUMP GROUP 3
Standard Description
This motor pump includes a 4.5″ DC motor as well as a CBSR gear pump that has a common power up/gravity down circuit with a relief valve, a verify valve and also a solenoid release valve.
Unique Notes
1. This energy unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean all of the hydraulic elements concerned prior to mounting the electrical power unit.
three. Viscosity on the hydraulic oil shoud be 15~68 cst, which ought to also be clean and absolutely free of impurities. N46 hydraulic oil is advisable.
4. The energy unit really should be mounted horizontally.
5. The relief valve stress is preset about 25% higher compared to the working strain.
6. Flow manage valve for lowing speed adjustment is accessible unpon request.