admin

October 30, 2019

Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor electric fan motor china capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control change is still installed nevertheless the cord itself is normally detached as observed in the photos. (Discover “Control Notice” below for alter type.)
T (See “Application Notice” below for utilize in a variety of other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and also to be on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have a pull-chain). If you order several engine at the same time, we can do our best to supply your order with each one sort of control or the additional.
Application Note: USUALLY DO NOT use this electric engine in a nonfan application. This is a completely enclosed fan electric motor and made to have constant ventilation over the motor casing for cooling. The casing isn’t vented and the electric powered electric motor will overheat and get into automated thermal overload if operate in a nonfan plan where there isn’t strong ventilation past the motor. (Caution Note: the electrical motor will restart instantly when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to proceed into automated thermal overload. (Your companion blade from another manufacturer may possess a steeper blade position.)
Origin: This electric motor is produced in China.