The EP Greenhouse Gearbox is a compact and lightweight reduction gearbox with a limit switch system that’s suitable for assembly of a locally available electric engine. The Gearbox is used in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-installEP Gearbox is certainly rainproof and windproof. The Gearbox has a high protection class (IP65) and can be used in an ambient temperature of 0-60 °C.
The low-noise Gearbox for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are Gear motors for Greenhouse integrated within an aluminium precision housing. The self-braking worm wheel transmission ensures that the drive shaft is usually locked when the decrease gearbox isn’t running. The fully sealed reduction gearbox has an growth chamber with a diaphragm to keep carefully the gear essential oil at a minimal pressure under all circumstances, even at high temps. Thanks to the use of an growth chamber, the Gearbox could be installed in any position. There are no restrictions, since there is no dependence on a bleed connect. The sealed reduction gearbox keeps the apparatus oil of the Gearbox in optimal condition because of its entire operating life time. The Gearbox is ideal for discontinuous use, working course s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gearbox has an FT85 motor assembly flange, to which a suitable IEC standard motor can simply be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an built-in chamber and is enclosed by an impact-resistant plastic material cover. The limit switch system is obtainable and simple to adjust. The limit change system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The Gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The Gearbox for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installation of IEC regular motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).