“H” CLASS Refuse Drag Chains is used for conveying sawdust,wooden chips, pulp, garbage, tankage, ashes, and other Leaf Chain abrasive spend through either wooden or metal troughs. Due to the large, wide opening area, “H” CLASS Refuse Drag Chain provides sizeable transporting capacity when operated at moderate speeds.
Leading face of every barrel is flat, providing a broad area to push material along the trough and to keep carefully the chaim from riding over the top of the material. The rounded inner part of the barrel is definitely carefully shaped to create excellent sprocket contact. Sidebars are reinforced with putting on shoes which provide both
additional wearing surface area and stiffening for the hyperlink. A vertical member on each sidebar assures added link rigidity and shields the pin from harm.
“H”CLASS Refuse Drag Chain is available in EVRT-POWER Promal or Duramal with a tensile strength selection of 36,400 to 52,000 pounds. This durable working chain is available in a pitch selection of 5.000 to 8.000 inches. Each link is produced in accordance with manufacturer’s specifications and may end up being interchanged with links created by additional chain producers. “H”CLASS Refuse Drag Chain is available in riveted construction just. Grease chambers, cored into each link’s barrel, hold grease which lubricates pins.
Wide faced sprockets, either of machined or cast metal, are recommended for”H” class Refuse Drag Chain operation. Links should always be operate in the direction of the closed barrel.