January 4, 2021

1.A connecting hyperlink of an O-ring Chain for standard application is pre-coated with grease at the pins. In advance of connection, verify the grease around the surfaces of pins, and in case the level of grease is small, apply grease with bare hands. (If gloves are applied, the grease will be absorbed through the gloves.)
Illustration: When the connecting website link (I) of an O-ring chain for general application is
shipped, O-rings are fitted at the roots in the pins. In the event the O-rings come loose resulting from vibration throughout transport, refit the O-rings in on the roots on the pins.
In this case, you’ll want to return the grease collected with the roots from the pins on the central surfaces in the pins, far more at portion A than at portions B shown during the over illustration. (Portions A is worn as a result of sliding with the bushings.)
two.The chain is often most conveniently linked around the teeth of a sprocket. Engage the hyperlinks at each ends on the chain together with the sprocket teeth and fit connecting pins. When the sprocket is often moved, the chain can also be connected within the loosened side.
3. Connecting process
1.Verify that O-rings are attached to your roots on the pins.
2.In the event the level of grease applied within the connecting pins is modest, coat the pins with grease on the central portions.
3.Insert the connecting pins in to the bushings of your inner links at each ends.
four.Verify that the grease is utilized for the total face with the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and when pressing the connecting plate, install the spring clip. Verify no matter whether the head (the finish with no split) with the spring clip is turned during the feeding path on the chain. (See the next illustration.)
six.You should definitely confirm that the spring clip is securely fitted during the clip grooves of your connecting pins.
This completes jointing on the connecting hyperlink. Note that grease on the surfaces of connecting pins and O-rings may be eliminated for the duration of installation operate. In this case, re-grease employing the grease around the surface in the base chain or even the grease during the polyethylene bag by which the connecting hyperlink was contained.