Product features
Solitary strand sprocket with one set of teeth around the circumference for applications where a single chain can support the torque and load
Pitch of 3/4 inch for size 60 chains
Sprocket bore and hub with QD fittings for inserting and locking bushings into place
Type B sprocket with a hub projection on one side to accommodate numerous kinds of bushings to help prevent sprocket from slipping on the shaft
Sprocket teeth help prevent slipping and binding in order to avoid power loss in assemblies
Product description
This Tsubaki roller chain sprocket includes a 3/4-inch pitch, fits size 60 chains, and is single strand with one set of teeth around its circumference for use with single strand chains. It really is a sort B sprocket with a hub projection encircling the bore on one side, and both hub and bore have Quick-Disconnect (QD) fittings for inserting and locking into place different QD bushings based on the diameter of the shaft. The teeth of the sprocket help prevent slipping and binding to avoid power loss in assemblies. It meets International Business for Standardization (ISO) 9001 for quality assurance. This single strand roller chain sprocket can be suitable for use in a wide range of applications regarding light to moderate loads and ongoing, high-cycle functions, including automobile transmission systems, construction and agricultural gear, conveyors, and factory production and assembly lines, 
A roller chain sprocket is a thin wheel with deep, uniformly spaced the teeth ringing its circumference. The distance from the peak of 1 tooth to another is named the pitch, and is commonly measured in 1/8-in . increments. The sprocket transfers power and movement by a roller chain that is threaded over one’s teeth of the sprocket. The alignment of the chain with the sprocket’s pitch helps prevent the chain from slipping so that no power is definitely lost. In the center of the sprocket may be the bore (hole) for sliding the sprocket onto a shaft, and a bushing or bearing is usually often fitted to the sprocket’s hub to custom-suit the sprocket onto a shaft to hold it firmly in place. A hub is usually a protruding, raised lip encircling the bore of the sprocket. Sprockets with hubs on both sides are Type C, sprockets with hubs on one side are Type B, and sprockets without hubs are Type A sprockets. For applications requiring sprockets to end up being swapped onto shafts of different diameters, a sprocket with a bore huge enough to match all shafts can be used, with the gap between your bore and shaft closed with a bushing or bearing. Roller chain sprockets are found in a broad range of applications where in fact the drive power of an engine must be transferred into motion, such as in motor vehicles, conveyors, escalators, agricultural, forestry and mining gear, aeronautics, robotics and space exploration, amongst others.
U.S. Tsubaki Power Tranny manufactures a number of chains, sprockets, and other power transmission parts that meet International Organization for Standardization (ISO) requirements for quality assurance. The company, founded in 1917, is usually headquartered in Wheeling, IL.