The electric motor rotating shaft is horizontal, the travel pinion spin axis is also horizontal. The issue is that these axes are not aligned, they will be parallel to one another. The Cardan Shaft redirects the travel shaft to the drive pinion without changing the path of rotation.
Widely used in industry, cardan shafts have confirmed practical upon applications where space is limited-as well when in conditions where an element in the device train (e.g. paper roll) might need to always be actuated (dynamically positioned) to an alternate position when the machines are not operating. The universal joint allows for limited movements without uncoupling. To make sure ample lubrication circulation, which prevents the universal joints from seizing, cardan shafts are normally installed with an position from 4 to 6 6 degrees at the universal joints. Experience, though, has proven that the angle between the shafts of the driver and powered unit ought to be kept to the very least, preferably less than 4.36 mrads (0.25 degrees). Preferably, the angles between your driver and powered shafts and the cardan shaft, proven as β1 and β2 in Fig. 1, would be equal. Geometrically, this might equate to zero angularity existing between your driver and driven unit: Quite simply, the shafts of the driver and driven machine will be parallel to each other.

Usually it consists of a tubular shaft, two sets of Universal Joints and glove system – ferrule stepper, among others. It is definitely a component of the transmission program, its function is normally to redirect the engine turning activity, after passing through the gearbox and the drive to the wheel, going right through the ‘planetary and satellite’ system etc.

Our specialised staff will gladly support you in finding the right universal joint for your Cardan Shaft china application or will develop a suitable solution according to your unique requirements.
Cardan shaft, often known as cardinal shaft, is a component of torque transmission.