A chain and sprocket drive is a type of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, found in motors as a drivefrom crankshaft to camshaft.
Ever-ability is proud to share a wide selection of Sprockets along with our huge selection of agriculture, gardening, cooking and outdoor products. We stand behind all 26,000 products we sell with our Satisfaction Guarantee. Customer Service is the cornerstone of us business, and has recently been for over 50 years.
Application
Ever-power drive sprockets provide durable, reliable service and show replaceable tooth plates for easy field protection. Tooth plates for 102 and 142 series chain are available with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL plus the 175 and 260 series use our non-symmetrical profile.
Travel sprockets weren’t always designed to be bolted upon. At one time they were welded onto the ultimate drive motor and had to be lower off when they were replaced. Sooner or later, welded-on adapters were mounted that allowed the sprocket to end up being bolted on, and newer designs use the bolted approach altogether.
When someone sends in a final drive motor for all of us to have a look at or?rebuild/reman, we advise them to eliminate the sprocket. We don’t require the sprocket in place to evaluate the electric motor and the added fat (which is often significant) unnecessarily improves your shipping costs.
Signs of Sprocket Wear
One’s teeth on a drive sprocket are where you search for wear . They should be tall and smooth by the end, not sharp or dished by the end. And the sprocket, and more specifically its teeth, start to wear, its diameter becomes small. This causes what is known as a pitch mismatch, where in fact the tooth on the sprocket no longer interact with the track backlinks as effectively. This can accelerate the dress in of the sprocket and decrease the efficiency of your products.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive engine.
Preventing Sprocket Wear
One of the key methods to prevent accelerated sprocket don is to check the track pressure. If the tension is too tight, it will cause don on the sprocket pearly whites. We’ve talked before about the importance of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (particularly if there is a build up of dried mud and particles). That’s area of the purpose we put so much focus on keeping the undercarriage clean
Conclusion
With out a functioning drive sprocket, your track drive won’t manage to propel your equipment. Fortunately, there are methods to help your travel sprocket go longer: keep the track pressure at a proper level and hold your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track equipment should be inspected regularly. If you discover early wear or damage to your tracks, a donned sprocket may be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the next Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary depending on your serial number.
All Ever-electric power sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The substitute and repair of tooth plate segments will not require removing of the travel shaft, bearings, etc. Ever-power also designs custom split hub parts for retrofit applications that minimize field labor costs.
At first glance, you might feel that if you’ve seen one drive sprocket, you’ve seen all of them. However, Ever-electricity features added an I.D. lip and spiral band that captivate the needle bearing along with an external snap ring that improves performance and reliability. While simple to overlook, it’s this focus on details that the racer possesses come to anticipate from Ever-power.
An We.D. lip and spiral band that captivate the needle bearing
External snap ring caps sprocket about drum & increases durability
CNC-machined teeth include a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard