Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed Electric Fan Motor Control switch. All of the wiring in the middle of your electric electric motor, capacitor and quickness control switch is still installed however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for alter type.)
T (See “Program Notice” below for make use of in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” lengthy with a collection screw easy. There are (4) threaded mounting lugs on leading of the motor, ½” long x .16 dia. with washers and nuts. The studs appear to ‘ve got 4mm threads and to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to another).
Rate: The approximate electric motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine just as (but you possess a rotating knob and you have got a pull-chain). If you order several electric motor at a time, we will do our best to supply your purchase with each one kind of control or the excess.
Application Note: USUALLY DO NOT use this electric motor in a nonfan software. This is a completely enclosed fan electric electric motor and designed to have constant ventilation over the electric motor casing for cooling. The housing isn’t vented and the electrical electric motor will overheat and enter automated thermal overload if operate in a nonfan plan where there isn’t strong ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the engine and lead it to proceed into automatic thermal overload. (Your companion blade from another producer may possess a steeper blade angle.)
Origin: This electric engine is produced in China.