The EP Greenhouse gear reducer is a compact and lightweight reduction gear motor with an integrated limit switch system that’s suitable for assembly of a locally available electric electric motor. The gearbox is utilized in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP geared motor is definitely rainproof and windproof. The gear reducer includes a high protection course (IP65) and can be used in an ambient temperature of 0-60 °C.

The low-noise reducer for Greenhouse includes a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel tranny means that the drive shaft is locked when the decrease gearbox is not running. The fully sealed reduction gear motor has an expansion chamber with a diaphragm to keep the gear oil at a minimal pressure under all circumstances, even at high temperatures. Thanks to the use of an expansion chamber, the gearbox can be installed in any placement. There are no restrictions, since there is no dependence on a bleed plug. The sealed reduction gear motor keeps the apparatus oil of the gear motor in ideal condition because of its entire operating lifetime. The gearbox is suitable for discontinuous use, operating course s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor comes with an FT85 motor assembly flange, on to which the right IEC standard motor can easily be installed (EN 50347).

The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit switch system is installed in an integrated chamber and can be enclosed by an impact-resistant plastic-type cover. The limit change system is obtainable and simple to adjust. The limit switch system’s optimum switching range is 40 or 64 revolutions of the drive shaft. The cabling is connected in spring-clip connections. The gearbox comes with an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates can be found as accessories.

Maximum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of application of 4-pole electric motor.
Protection class IP65.
May be used in ambient temperature ranges of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC regular motor (EN 50347).
Maximum switching selection of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).