Laser cutting air compressor

9.Motor maintenance.
Based on the motor instruction manual for maintenance.

8. drive belt.
To Air Compressor For Tire Production Equipment adjust the degree of tightness every 2000 hours, every 4000 hours to check on the wear and tear, according to deterioration decide whether to replace.

7, safety valve.
Every 4000 hours to check on if the action is sensitive.

6.Pressure valve.
Clean every 4000 hours, and check if the opening pressure is regular.

because for oil-air flow compressors, the oil-water separator function: separates the oil from the moisture in the air flow and therefore accumulates over an extended period of time and will affect the filtration efficiency without the need to displace or clean the oil-water separator

5, coal and oil separator.
Every 4000 hours need to replaced a fresh piece.

Otherwise the oil will make a influence of the cutting effect

4.oil filter.
Every 2000 hours to displace a new piece.

Every 1000 hours need check oil content nonetheless it want to replace the new oil after 4000 hours