Please follow the alternative instructions given the replacement locks for proper unit installation. Make sure you advise proper lock assembly variant/lettered pair required to ensure proper fit.
The ignition lock assembly on your own car is comprised of two separate parts; the lock cylinder, which – in cars created after about 2000 — uses a passkey to help prevent theft, and an electrical component called the ignition move that passes power to devices such as wipers, electric windows, door locks and the radio. The ignition switch as well sends capacity to the starter motor when you switch the main element. The ignition lock is where you insert the key to start the automobile and locks the steering wheel until the key is inserted and considered the “on” job. The steering wheel can’t be rotated without the key in the “on” posture, this means a thief cannot drive off with the car simply by hot-wiring it. If the ignition lock assembly — either portion — breaks, it means that you won’t manage to drive the automobile until it’s repaired. The ignition lock itself can’t be repaired and must be replaced, generally by a mechanic with the proper tools and understanding. If the electrical part of the assembly breaks, you’ll be able to replace it in most vehicles without disturbing the ignition lock. A destroyed ignition lock assembly can show up in a number of ways. You may notice that it’s receiving harder to carefully turn the key to begin the car – almost just like the important doesn’t fit anymore. Occasionally the steering wheel jams following the car starts and you have problems moving it. The problems could be intermittent as the assembly fails, which signifies that sometimes the car will start without a problem and various other occasions the engine won’t begin or may keep working even once you turn off the main element. Because a broken or failing ignition lock assembly is very annoying and can make your vehicle unreliable, you will most probably want to take it to your mechanic for diagnosis and service as soon as you notice the problem.

Normally you will reuse the old lock rung from the old lock assemblies. Nevertheless, if damaged, you must also order a replacement rung.

Replacement lock assemblies are sold in pairs only and include instructions and all installation fasteners.