Materials Handling Power UNIT two
Common Description
This electrical power unit characteristics power up gravity down circuit. Activate the get started solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the lowering pace managed by the strain compensated movement control valve. Items of this series might be widely utilized in the industry of logistic products for instance fork lift, mini lift table, etc.
Distinctive Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean every one of the hydraulic parts concerned just before mounting the energy unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst,which should really also be clean and totally free of impurities, N46 hydraulic oil is advisable .
4. Oil modifying is needed just after the preliminary one hundred operation hours,afterwards when each and every 3000 hrs.
five. The power unit needs to be mounted horizontally.

Material Handling Energy UNIT one
Standard Description
This power unit is intended for that fork lift field, consisting of extremely efficient gear pump, DC motor, manual raise and reduced valve, tank, ect. The up and down motion are managed from the lever from the manual release valve, that’s equipped with an electric switch to activate the motor. The lowing pace is controlled by the stress compensated movement management valve.
Particular Notes
one. The duty of this electrical power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean all of the hydraulic parts concerned before set up of the power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and totally free of impurities, N46 hydraulic oil is encouraged .
4. Oil shifting is needed soon after the original 100 operation hours, afterwards after every single 3000 hrs.
5. The power unit proven is intended to be mounted horizontally.