Ever-Power Company , announces its right angle NEMA gearbox made to IP65 specs for use in clean down applications in packaging apparatus and similar machinery. Rated backlash is certainly 30 arc-minutes with options for 4 or 8 arc-minutes. The NEMA 34 flanged gearbox has 440C Stainless bearings with seals and Nitrile o-rings shaft seals on both input and output. All fasteners are stainless. Hard anodized aluminium or 316 Stainless housings can be found. Customizing for apart from NEMA motors or your unique application is quickly done.
This Nema 17 stepper motor with 39mm body and 1.68A rated current, integrated with a 41mm Planetary gearbox of 5:1 equipment ratio. It’s a great choice to applications that with special space but require low swiftness and/or high torque.
Electrical Specification
Manufacturer Part Amount: 17HS15-1684S-HG5
Motor Type: Bipolar Stepper
Step Angle: 0.36 deg
Keeping Torque without Gearbox: 39Ncm(55oz.in)
Rated Current/phase: 1.68A
Phase Resistance: 1.6ohms
Voltage: 2.7V
Inductance: 3.2mH ± 20%(1KHz)
Gearbox Specifications
Gearbox Type: Planetary
Gear Ratio: 5 : 1
Efficiency: 95%
Backlash at No-load: <=15 arcmin
Max. Permissible Torque: 3.5Nm(495.6oz.in)
Moment Permissible Torque: 6Nm(849.7oz.in)
Max. Radial Load: 150N
Ambient Temperature: -10 – 90℃
Insulation Class: B
Noise: <=50 dB
Life: 20000 h
Physical Specifications
Framework Size: 42 x 42mm
Motor Length: 39mm
Gearbox Length: 41mm
Shaft Diameter: Φ8mm
Shaft Length: 23.5mm
Key-way Length: 14mm
Number of Leads: 4
Lead Length: 320mm
Weight: 680g
Replaced by the 3325_0, a motor with the same NEMA size and same torque.
This NEMA-17 motor comes with an integrated Planetary gearbox with a 52/11 :1 ratio. It creates 16.2 Kg-cm of torque at 1.68 Amps.
When linked to a 1067 – EP, the 3317 includes a maximum speed of a little over 900 RPM. At the result of the gearbox, the stage angle is a little under 0.35°. With all the step angle in calculations, you should derive the precise step angle by dividing 1.8° by the gearbox reduction ratio.
This specific revision of the 3317 is manufactured by a different manufacturer, but should behave very similarly to the revision 0 version.
Brother Gearmotors NEMA C-Face Speed Reducers
The gears in these NEMA C-Face speed reducers are high strength, free of maintenance and may be mounted in virtually any direction with their slip fit “O” ring style. Low to high reduction ratios, flange mount or foot install types, right position or hollow shaft right angle types available. Suit NEMA C-Encounter AC motors, brushless DC motors and brushed DC motors.
For 1/2 HP up to 3 HP Motors
NEMA C-Face, 140TC and 180TC input flanges
Inline Helical Gear Swiftness Reducers
Right-Angle Hypoid Gear Speed Reducers
Product Lineup
Product Features
Allowable Torque
Downloads & Reference
NEMA C-Face Quickness Reducers Lineup
Output Power
Gear Type
Input Power
Gear Ratios
Maximum Input Speed
NEMA 56C Speed Reducers
NEMA C-Face Speed Reducers
Parallel Shaft (Foot Attach)
1/2 HP
1 HP
2 HP
3 HP
5:1 ~ 200:1 3600 r/min
Parallel Shaft (Flange Attach)
Right-Angle Hollow Shaft
5:1 ~ 240:1
Right-Angle Solid Shaft
5:1 ~ 240:1
*Torque and Velocity vary based on input voltage and frequency, please review item specifications for details.
Longer Life
Compared to a spur gear of around the same pitch diameter, Helical gears may transfer high loads at greater speeds. That is because of the gradual engagement of one’s teeth and soft transfer of the load.
Helical Gears
Lightweight and Compact
Die cast aluminum equipment housings make these swiftness reducers light in weight, allowing engineers to design less expensive mounting provisions
Maintenance Free
High-quality synthetic grease is used in all gearboxes. They are filled at the factory and do not need maintenance filling or level checks. This saves precious time at set up and eliminates concern for costly oil disposal required by the EPA.
Mount in virtually any Direction
These gearboxes are sealed with machine “slip” match “O” rings and dual lip spring shaft seals upon both motor and input shaft and output shaft driver. Thus, the gear motors could be mounted in virtually any conceivable path without concern for the positioning of a breather connect.
NEMA Result Flange Planetary Gearboxes, Max. Ratio 1000:1
Spec

Gearing Arrangement:Planetary,Spur
Frame Size:42.6/60/90/115/145 mm
Ratio:3~1000:1
Nominal Output Torque:8~215 N.m
Nominal Input Speed:2500~4000 rpm
Max. Input Speed:5000~6000 rpm
Backlash:12~15 arcmin, three stages, 6~9 arcmin, single stage, 8~12 arcmin, two stages
Noise Level:60~67 dBA/1m
Enclosure:IP65
Lubrication:Synthetic Lubricant
Key Features

The Ever-Power EP Series gearboxes include a NEMA output flange with metric shaft, to provide exceptional torque ratings and capacity for a lot of present servo and stepper movement control applications. The gearboxes are drop-ins for some industry standards and available from one to three levels with ratios 3:1 up to 1000:1, the very best backlash of < 6 arc-minutes. Adapters for all servo and stepper motors. Features:
5 frame sizes with NEMA 17, 23, 34, 42, 56 flange and metric shaft
Backlash as low as 6 arc-minutes
Ratios up to 1000:1
High radial and axial loading capacity
20,000 hours service life
Synthetic grease, free of maintenance
Reliable operating performance, affordable integration