Our direct supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the proper time at the right price.
Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made from high quality engineered materials with great tolerance. The feature is definitely easy to make use of and needs no additional alteration. These bushings can match almost all sorts of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: complete range of both metric and imperial obtainable.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends upon the application.
Complete short reach range obtainable, for compact light-weight assemblies & Clean, Compact Design.
Ease of installation and removal.

Our immediate supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the proper time at the proper price.
Taper bushing are widely used as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered components with great tolerance. The feature is usually easy to use and needs no extra alteration. These bushings can suit almost all sorts of assemblies and sizes. They are the best choice in design for mechanical connections.
No costly re-boring: complete selection of both metric and imperial available.
Standard range suits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range offered, for compact light-weight assemblies & Clean, Compact Design.
Ease of installation and removal.
The original sheave and pulley mounting program developed to facilitate installation and substitute of components.
The QD (Quick Detachable) design offers both conventional (flange outboard) and reverse (flange inboard) mounting configurations.
1. Be sure the tapered cone surfaces of the bushing and the inside of the driven item are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end first. Assemble key.
3. Placement QD bushing on shaft. Tighten established screw over key “hands tight” with standard Allen wrench only. Do not use excessive force.
4. Slide large end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Take note: Install M thru S bushings in the hub to ensure that both extra holes in the hub can be found as far as possible from the bushing’s saw cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque desk on back. Do not use extensions on wrench handles. There must be a gap between the face of the sheave or sprocket hub and the flange of the QD bushing to insure a satisfactory cone grasp and press fit.
CAUTION: THIS GAP SHOULD NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power transmitting applications. Flanged quick-disconnect bushings feature a completely split style to help provide easy set up and disassembly. A tapered bushing with straight edges uses an interior screw to help drive the bushing into the shaft, while a split taper has a flange and an integral on the bushing to help provide more drive.
QD bushings (” and metric sizes) have a flanged style and show a 4° taper with regular or reverse installation. They are stocked in popular finished bore sizes and minimal plain bore for customized reboring.
Many people make reference to both types as a “taper lock” because they both use the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, uses a set screw to operate a vehicle the bushing in to the bore of the component becoming set up (sheave, sprocket, etc.). Be cautious when installing these screws. The holes with threads on the bushing are for removal just. Also be aware that the appearance of a flange on the outside of the bushing doesn’t necessarily mean it’s a QD style. Split Taper bushing also has a flange, and the two are not interchangeable. The QD design has a split that continues through the flange. The Metal QD (Quick Disconnect) Type bushing offers flexible and easy installation while providing exceptional holding power. QD Bushings are utilized thought out the industry offering comfort and design versatility. They are precision machined of quality Steel and are installed by tightening many cap screws. This draws the bushing into the taper bore of the product which compresses the bore of the bushing. QD bushings are often removed utilizing the cap screws as jack-screws. Double drilled holes are furnished in QD Bushings permitting mounting of product in the conventional or reverse positions. This enables cap screws to end up being installed through product hub or bushing flange whichever can be most convenient. A significant benefit in set up, cap screws are always inserted from the outside where they are often accessible. QD Bushings are available from stock with all popular bores within the number of every size bushing.
QD Bushings feature a split tapered flange with the split central to the flange and taper. They are applied to sprockets, sheaves, and pulleys where more clamping drive is required over standard bored-to-size bushings. Quick-Disconnect Bushings are crucial for mounting v-belt drives, synchronous belt drives and roller chain drives.