February 23, 2021

TF Style Flanges
Model TF flanges are created from the same high-strength cast iron because the S flanges, but are created to accommodate the international standard Taper Lock bushing for uncomplicated set up and removal
TF Sort flanges allow for mounting the bushing to the front (hub) side with the flange
TF flanges can be found in sizes six by 16 and might be applied with any style of sleeve as pictured on web page SF-5
TR Variety Flanges
TR flanges are very similar on the TF design, but enable for the Taper Lock Bushing for being mounted and removed from
the reverse or serration side from the flange
The constrained torque ratings on the Taper Lock Bushings make it possible for TR flanges to only be applied with EPDM or Neoprene sleeves
Diverse bushing sizes are made use of, so they have unique greatest bores compared to the TF flanges
Sizes six through 16 are available
Taper-Lock Bushings
The field normal taper lock bushing is usually a split design and style making it possible for a compression fit with the flange on the shaft with no set screws
The very simple style and design tends to make the installation and removal straightforward whilst the 8° taper grips tight and supplies great concentricity
A Diminished level of inventory could be attained on account of the many other energy transmission components that use Taper Lock Bushings like: sheaves, sprockets, and pulleys
will not present the Taper-Lock Bushings themselves as they are widely available from other manufacturers