SNOW PLOW Electrical power UNIT

Basic Description
Consisting of the pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is created to operate material handling gear. The reducing movement is achived by the solenoid valve with the lowering pace managed by an adjustable needle valve. The left and ideal functions are equipped which has a dual pilot operated examine valve and cross-over relief valves.
Remark: Please talk to our revenue engineer to the various pump displacement, motor power or tank capacity.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
two. Clean the many hydraulic parts concerned before installation of the energy unit.
three. Viscosity with the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of charge of impurities.N46 hydraulic oil is recommended.
four. This electrical power unit must be mounted horizontal.
five. Check the oil level within the tank after the primary start off on the energy unit.
six. Oil altering is required following the original one hundred operation hours, afterwards when each and every 3000 hrs.