EP-T 10MM Aluminum Straight Bore Timing Pulley — Belt Width 50MM

EP-T 10MM Aluminum Straight Bore Timing Pulley — Belt Width 50MM

DIN 7721 Standard | T Series | Metric Pitch 10mm | 6F Straight Bore | Aluminum Alloy

2. Five Key Product Advantages

3. Working Principle of the Straight Bore Timing Pulley

เอ พูลเลย์ไทม์มิ่งแบบรูตรง operates as the primary drive or driven element in a synchronous belt drive system. Unlike V-belt or flat-belt pulleys that rely on friction for power transfer, a พูลเลย์ไทม์มิ่งแบบรูตรง and belt system uses precision-formed teeth that mesh directly with the belt's internal tooth profile, creating a positive, slip-free drive connection. This synchronous engagement is what gives the system its ability to maintain exact speed ratios and angular position accuracy across wide load ranges. The cylindrical bore mounts directly onto the drive shaft, transmitting torque through the keyed or interference-fit interface without any intermediate bushing component.

When the drive พูลเลย์ไทม์มิ่งแบบรูตรง rotates, the T10-profile teeth enter the belt's tooth pockets at the engagement arc. Each tooth transfers tangential force directly through the tooth flank into the belt's tension members — usually fiberglass or steel cord — and onward to the driven pulley. Because there is no relative sliding between the belt and พูลเลย์ไทม์มิ่งแบบรูตรง during normal operation, the system generates very little heat, which is a key advantage over friction-based belt drives in precision or thermally sensitive environments. The flanges on either side of the pulley face serve to prevent lateral belt tracking deviation, keeping the belt centered throughout the drive cycle regardless of dynamic side loads.

The 10 mm pitch of this พูลเลย์ไทม์มิ่งแบบรูตรง means adjacent tooth centerlines are spaced exactly 10 mm apart along the pitch circle. The number of teeth engaged simultaneously — known as the mesh arc — depends on the พูลเลย์ไทม์มิ่งแบบรูตรง diameter and center distance. Larger pulleys in this range (e.g., the 60T variant with Dp of 190.98 mm) engage more belt teeth simultaneously than the smaller 18T pulley (Dp 57.29 mm), resulting in higher torque capacity per unit of belt tension. Selecting the correct tooth count is therefore a critical design decision that balances drive ratio, pitch diameter, and load capacity requirements for each specific installation.

4. Material Construction

The EP-T 10MM พูลเลย์ไทม์มิ่งแบบรูตรง uses aluminum alloy (designated "AL" in the part code system) as its primary body material. This choice reflects the specific performance demands of synchronous drive applications where low inertia, corrosion resistance, and machinability are all valued simultaneously. The aluminum alloy used in this พูลเลย์ไทม์มิ่งแบบรูตรง series provides a tensile strength level sufficient for the tooth shear loads encountered in typical T10 belt drive systems, while its density is roughly one-third that of steel — a meaningful advantage in dynamic positioning and servo systems where the driven load inertia directly affects settling time and energy consumption. This is why the aluminum straight bore timing pulley format has become the default choice for T10 drives in motion control, robotics, and automation equipment globally.

The tooth profile of this พูลเลย์ไทม์มิ่งแบบรูตรง is precision-machined to match the DIN 7721 T-series geometry. This machining process produces tooth flanks with the dimensional accuracy required for smooth meshing with compatible T10 timing belts, regardless of belt material (rubber, polyurethane, or open-end variants). The bore is finished to an h7 or H7 tolerance class depending on the required shaft fit, with the keyway cut to DIN 6885 specifications to accept standard parallel keys. The flanges are integral to the body casting or machining — not pressed-on inserts — ensuring concentricity with the pitch circle under all operating conditions encountered in service.

For more demanding environments involving higher temperatures, exposure to oils, or specific chemical media, the aluminum alloy material used in this พูลเลย์ไทม์มิ่งแบบรูตรง is compatible with anodizing surface treatments. Hard anodizing in particular can improve surface hardness significantly, reducing tooth wear in higher-duty drive applications. Stainless steel timing pulley variants are available as an option for applications requiring full corrosion immunity or compliance with food-grade equipment standards. Customers seeking custom bore sizes, non-standard tooth counts, or alternative materials (including carbon steel or engineering polymer composites) are encouraged to contact our technical team for project-specific guidance.

5. Application Scenarios

The EP-T 10MM พูลเลย์ไทม์มิ่งแบบรูตรง is suitable for a wide range of synchronous drive applications spanning multiple industries. Below are common use cases where this พูลเลย์ไทม์มิ่งแบบรูตรง type provides clear operational benefits over alternative drive component approaches.

6. Applicable Standards and Regulatory Considerations

Industrial power transmission components including the พูลเลย์ไทม์มิ่งแบบรูตรง are subject to various national and international standards that govern dimensional tolerances, material properties, and safety performance. Understanding which standards apply in your region helps ensure compliance and simplifies procurement approval processes. Below is an overview of the principal frameworks relevant to the EP-T 10MM T10 metric pulley.

DIN 7721 (Germany / EU): This is the primary dimensional standard for synchronous belt drives using trapezoidal tooth profiles (T-series). The EP-T 10MM พูลเลย์ไทม์มิ่งแบบรูตรง is manufactured to meet DIN 7721 profile dimensions, ensuring interchangeability with T10 belts conforming to the same standard. DIN standards are administered by the Deutsches Institut für Normung and are widely accepted across the European Union as the de facto technical basis for metric synchronous drive components.

EU Machinery Directive 2006/42/EC and Successor Regulation (EU) 2023/1230: For OEM equipment builders supplying products within the European Economic Area, power transmission components incorporated into machinery must be selected and installed in compliance with the Essential Health and Safety Requirements of this directive. A พูลเลย์ไทม์มิ่งแบบรูตรง and synchronous belt are typically sub-components that contribute to the mechanical transmission subsystem covered under Annex I, Section 1.3.2 (mechanical transmission hazards). CE marking on the final machine assembly must account for the selection of appropriately rated drive components.

ISO 9001 Quality Management: Customers in regulated sectors including automotive, aerospace, and medical equipment manufacturing frequently require drive components sourced from ISO 9001-certified supply chains. Production of the EP-T พูลเลย์ไทม์มิ่งแบบรูตรง series follows quality management procedures consistent with ISO 9001 principles, covering incoming material inspection, in-process dimensional verification, and final inspection before shipment.

United Kingdom (Post-Brexit): Following the UK's departure from the EU, the UKCA (UK Conformity Assessed) mark has replaced CE marking for machinery placed on the UK market. EP-T series พูลเลย์ไทม์มิ่งแบบรูตรง components intended for UK OEM machine builders should be selected with UKCA compliance of the final machine assembly in mind. The underlying DIN 7721 dimensional standard remains unchanged and equally valid for UK applications.

North America (ANSI/RMA Standards): In the United States and Canada, synchronous drive belts and pulleys are governed by ANSI/RMA IP-24 (inch-pitch) and corresponding metric guidelines. The T10 metric pitch profile used in this พูลเลย์ไทม์มิ่งแบบรูตรง is an ISO/DIN metric standard rather than an ANSI inch-pitch profile, but is commercially accepted across North American markets. Machinery conforming to OSHA 29 CFR 1910.219 (mechanical power transmission guarding) must incorporate appropriate belt/pulley guards regardless of the drive type specified.

Australia and New Zealand: AS/NZS standards for machinery guarding (AS 4024 series) and occupational health and safety legislation in each state and territory govern the safe installation and guarding of power transmission components. The T10 metric pitch พูลเลย์ไทม์มิ่งแบบรูตรง standard aligns with ISO practice accepted by Standards Australia.

RoHS and REACH (EU Environmental Regulations): Aluminum alloy พูลเลย์ไทม์มิ่งแบบรูตรง products are generally compliant with RoHS Directive 2011/65/EU (restriction of hazardous substances in electrical and electronic equipment) and REACH Regulation 1907/2006. Customers requiring formal compliance documentation or REACH SVHC substance declarations for procurement purposes should request supplier declarations at the time of order.

7. About Us

We are a specialist manufacturer of metric timing pulleys, synchronous drive components, and related mechanical transmission products with decades of production experience. Our manufacturing facility is equipped with CNC machining centers, high-precision gear hobbing machines, and automated quality inspection systems dedicated to the production of พูลเลย์ไทม์มิ่งแบบรูตรง variants, taper-lock pulleys, sprockets, couplings, and associated drive elements. The EP-T series พูลเลย์ไทม์มิ่งแบบรูตรง represents one part of our comprehensive catalog, which spans T2.5, T5, T10, AT series, and HTD profiles in both aluminum and steel variants. All products undergo dimensional verification on coordinate measuring equipment before dispatch, ensuring that stated bore tolerances and pitch circle diameters are met consistently across every production batch.

Workshop

8. Related Products — Complete Drive System Supply

A synchronous drive system is only as reliable as every component in it. Alongside our full range of พูลเลย์ไทม์มิ่งแบบรูตรง products, we supply complementary drive components that pair directly with the EP-T series to form complete, pre-validated drive assemblies. Sourcing matched components from a single supplier eliminates compatibility risk and simplifies technical after-sales support for the lifetime of the drive system.

คำถามที่พบบ่อย