DK Detachable Teeth Sprockets

Any damage to the teeth surfaces of the sprocket diminishes the life with the conveyor chain.
With typical sprockets, considerably worn sprocket teeth have been repaired by teeth padding or even the total sprocket was replaced. In either case, fix was costly and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent substitute. This sprocket is highly rated by our shoppers for your dramatic financial savings in cost and time.
Construction
The teeth is usually replaced by two procedures: individual tooth substitute or sectional teeth replacement.
The bolts and nuts made use of for mounting the teeth on to the sprocket are spot-welded to prevent loosening.
The respective structures are illustrated on the proper.
The over photograph and the top correct illustration demonstrate a sprocket for personal tooth replacement. Since the joint encounter between the replaced teeth as well as the sprocket is formed within a special arc, the bonding accuracy is substantial as well as sprocket power is enhanced. On top of that, because the load acting about the mounting bolts is decreased, there exists significantly less chance of loosening. This sprocket development is patented.
You will discover two types of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are made use of for significant sprockets acquiring heavy loads and welded sheet steel hubs for other applications.