Power UNITS FOR DOUBLE-SCISSORS LIFT

Common Description
Equipped together with the zero leak bidirectional checking sole-noid valves, this power unit is developed for that operation of two independent circuits. Which are respectively for the key and subordinate platforms from the double scissors lift. Two cut-off valves are utilised for lowering the machine manually in situation of electrical power reduction. If more independent circuits are expected for your application please get hold of us for availability.
Remark: 1. Please seek the advice of our sales engineer for your unique pump displacement, motor electrical power or tank capacity.
2. CSA or UL certified motors can be found on request.
Unique Notes
1. The AC motor is of S3 duty cycle, which could only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean each of the hydraulic elements concerned in advance of set up of the electrical power unit.
three. Viscosity of your oil shoud be 15~46 cst,along with the oil really should be clean and no cost of impurities,N46 hydraulic oil is suggested.
four. The electrical power unit should be mounted vertically.
five. Check the oil degree from the tank following the original operating in the electrical power unit.
six. Oil changing is needed immediately after the initial 100 operation hrs,afterwards the moment every single 3000 hrs.